[MAR 2021] Cisco 300-430 exam dumps and online practice questions are available from Lead4Pass

The latest updated Cisco 300-430 exam dumps and free 300-430 exam practice questions and answers! Latest updates from leads4pass Cisco 300-430 Dumps PDF and 300-430 Dumps VCE, leads4pass 300-430 exam questions updated and answers corrected!
Get the full Cisco 300-430 dumps from https://www.leads4pass.com/300-430.html (VCE&PDF)

Latest 300-430 PDF for free

Share the Cisco 300-430 Dumps PDF for free From leads4pass 300-430 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1R-wAkst6JcYUp2d8-SH39YqPtV1F1jlP/

The latest updated Cisco 300-430 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
Refer to the exhibit.

An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the
network. Based on the local EAP debug controller provided, why is the client unable to connect?
A. The client is falling to accept the certificate.
B. The Cisco WLC is configured for the incorrect date.
C. The user is using invalid credentials.
Correct Answer: A

 

QUESTION 2
When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four
devices to the network at the same time?
A. The last device is removed and the newly added device is updated as an active device.
B. The registration is allowed, but only one device is connected at any given time.
C. All devices are allowed on the network simultaneously.
D. Purge time dictates how long a device is registered to the portal.
Correct Answer: B
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_Enhanced_Use_Case.html

 

QUESTION 3
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets
received, and then have the differentiated services code point set to match when it is resent to another port on the
switch. Which configuration is required in the network?
A. Platinum QoS configured on the WLAN
B. WMM set to required on the WLAN
C. MLS QoS trust dscp configured on the controller switch port
D. MLS QoS trust cos configured on the controller switch port
Correct Answer: C

 

QUESTION 4
Refer to the exhibit

An engineer must connect a forklift via a WGB to a wireless network and must authenticate the WGB certificate against
the RADIUS server. Which three steps are required for this configuration? (Choose three.)
A. Configure the certificate, WLAN, and radio interface on WGB.
B. Configure the certificate on the WLC.
C. Configure WLAN to authenticate using ISE.
D. Configure the access point with the root certificate from ISE.
E. Configure WGB as a network device in ISE.
F. Configure a policy on ISE to allow devices to connect that validate the certificate.
Correct Answer: ACF
https://mrncciew.com/2018/05/25/wgb-with-peap/

 

QUESTION 5
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which
element do you configure in a rule?
A. permit-ACL
B. WMM required
C. mark
D. rate-limit
Correct Answer: C

 

QUESTION 6
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses
connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that
FlexConnect local switching is enabled, which setting is causing this behavior?
A. ISE NAC is enabled
B. 802.11r Fast Transition is enabled
C. Client Exclusion is enabled
D. FlexConnect Local Auth is disabled
Correct Answer: D

 

QUESTION 7
All APs are receiving multicast traffic, instead of only the APs that need it. What is the cause of this problem?
A. The multicast group includes all APs
B. The wrong multicast address was used
C. The multicast group is assigned the wrong VLAN
D. Multicast IGMP snooping is not enabled
Correct Answer: D
https://www.cisco.com/c/en/us/td/docs/wireless/controller/74/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011.html

QUESTION 8
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all
corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile
devices. Users report poor voice quality when using Jabber.
QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class
and to ensure Platinum class for Jabber?
A. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
B. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
C. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
D. Configure QoS on the mobile devices that have Jabber installed.
Correct Answer: A

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.html#reference_7B4539C91FBE4639ACF906F6F3931667

 

QUESTION 9

A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is
enabled on a controller with 500 APs. Which feature connects the issue?
A. controller IGMP snooping
B. multicast AP multicast mode
C. broadcast forwarding
D. unicast AP multicast mode
Correct Answer: D
Note: The question is about the reason behind the CPU hike, it is not asking the solution for the issue https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicast-wlc-lap.html

 

QUESTION 10
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code
the upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has
been configured, how many image transfers between the WLC and APs will occur?
A. 1
B. 2
C. 5
D. 7
Correct Answer: B

 

QUESTION 11
What must be configured on ISE version 2.1 BYOD when using Single SSID?
A. no authentication
B. WPA2
C. open authentication
D. 802.1x
Correct Answer: B

 

QUESTION 12
The security learn is concerned about the access to all network devices, including the Cisco WLC. To permit only the
admin subnet to have access to management, a CPU ACL is created and applied. However, guest users cannot get to
the web portal. What must be configured to permit only admins to have access?
A. The guest portal must be configured on the CPU ACLs on the Cisco WLC.
B. Access to Cisco ISE must be allowed on the pre-authentication ACL.
C. Management traffic from the guest network must be configured on the ACL rules.
D. Traffic toward the virtual interface must be permitted.
Correct Answer: C

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71978-acl-wlc.html

 

QUESTION 13
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the
network at the AP switch port?

A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D

Note: To enable Local switching, you have to disable central switching

---

Vcecert shares the latest updated Cisco 300-430 exam exercise questions, 300-430 dumps pdf for free.
All exam questions and answers come from the leads4pass exam dumps shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 300-430 exam dumps questions at: https://www.leads4pass.com/300-430.html (pdf&vce)

ps.
Get free Cisco 300-430 dumps PDF online: https://drive.google.com/file/d/1R-wAkst6JcYUp2d8-SH39YqPtV1F1jlP/