[13-July-2021] New CCNP 300-510 SPRI Dumps with VCE and PDF from Lead4Pass (Update Questions)

New 2021 CCNP 300-510 SPRI exam questions from leads4pass 300-510 dumps!
Welcome to download the newest leads4pass 300-510 VCE and PDF dumps: https://www.leads4pass.com/300-510.html (135 Q&As)

P.S. Free 2021 CCNP 300-510 SPRI dumps are available on Google Drive shared by leads4pass: https://drive.google.com/file/d/1w-diIxpD21-AoDKbyDGo1zvzzDqLYbc-/view?usp=sharing

Free CCNP 300-510 exam questions and answers

QUESTION 1

cisco 300-510 exam questions q1

Refer to the exhibit. XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly
prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow
the falsely prepending prefix from being installed.
Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without
impact to other or future received routes?

cisco 300-510 exam questions q1-1

A. Option A
B. Option B
C. Option C
D. Option D

Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/routing/command/reference/b_routing_c
r41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229

 

QUESTION 2

cisco 300-510 exam questions q2

Refer to the exhibit. R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP
AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2
and R1, R3 is true?

A. The BGP session does not come up between R1 and R2 and between R1 and R3.
B. The BGP session comes up between R1 and R2 and between R1 and R3.
C. The BGP session comes up between R1 and R3, but not between R1 and R2.
D. The BGP session comes up between R1 and R2, but not between R1 and R3.

Correct Answer: B

 

QUESTION 3

cisco 300-510 exam questions q3

Refer to the exhibit. P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The
BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179
to each other.
Which two actions fix the issue? (Choose two.)

A. Change MD5 to HMAC-SHA1-12
B. Change MD5 to HMAC-ESP
C. Change MD5 to SHA-1
D. Change MD5 to HMAC-MD5
E. Remove the send and accept lifetime under key 1

Correct Answer: AD
Reference: https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-0/security/configuration/guide/sc40crsbook_chapter5.html

 

QUESTION 4

DRAG DROP
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto
the correct OSPF versions on the right.
Select and Place:

cisco 300-510 exam questions q4

Correct Answer:

cisco 300-510 exam questions q4-1

 

QUESTION 5

Refer to the exhibit.

cisco 300-510 exam questions q5

 

Which three statements are correct regarding the Cisco IOS-XR configuration? (Choose three.)

A. This router, acting as the RP mapping agent, will send RP announcement messages to the 224.0.1.40 group
B. This router, acting as the RP mapping agent, will send RP discovery messages to the 224.0.1.39 group
C. This router is the RP mapping agent only for the 224.11.11.11 and 224.99.99.99 multicast groups
D. This router is a candidate PIM-SM RP for the 224.99.99.99 multicast group
E. This router is a candidate PIM-BIDIR RP for the 224.11.11.11 multicast group
F. IGMPv3 is enabled on all interfaces
G. Other routers will recognize this router as the RP for all multicast groups with this router loopback 0 IP address

Correct Answer: DEF

 

QUESTION 6

cisco 300-510 exam questions q6

Refer to the exhibit. Router 1 has established an SR-TE tunnel with router 2. Which statement describes this
configuration?

A. Router 1 has a list of labels used to explicitly lay out a path to router 2.
B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
D. Router 2 is the head-end tunnel and has explicitly set a path to router 1.

Correct Answer: C

 

QUESTION 7

After an engineer configures BGP in R1, it starts receiving this message Jun 29 13:30:50.122: %BGP-5-ADJCHANGE:
neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1
2/6 (unacceptable hold time) 0 bytes Which action makes the peering come back up again?

A. Make a soft reset to the peer.
B. Set up a minimum hold-down timer higher.
C. Set up a hello timer higher.
D. Set up a hold-down timer higher.

Correct Answer: B

 

QUESTION 8

Refer to the exhibits.

cisco 300-510 exam questions q8

A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over
the core network. The operator is attempting to identify the next leg in the path from PE1. Which interface and label path
should the operator investigate next?

A. PE1 – Gi0/0/0/3 – forwarding label 24002
B. PE1 – Gi0/0/0/2 – forwarding label 24002
C. PE1 – Gi0/0/0/3 – forwarding label 24001
D. PE1 – Gi0/0/0/2 – forwarding label 24001

Correct Answer: C

 

QUESTION 9

cisco 300-510 exam questions q9

Refer to the exhibit. Routers RA and RB are IS-IS peers configured for NSF, but router RC is an IS-IS peer without NSF
capability. If RA undergoes processor switchover, what is the effect on the network environment?

A. If RC is operating without the Cisco configuration option, only 2 routers tear down their peering relationships and reestablish peering
B. All peer relationships remain up, but the link-state database is rebuild on each device
C. If RC is operating without the Cisco configuration option, all three routers tear down their peering relationships and reestablish peering
D. All peer relationships remain up and the link-state database is unchanged

Correct Answer: B

 

QUESTION 10

Refer to the exhibit.

cisco 300-510 exam questions q10

While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How
should the engineer solve the issue?

A. Set up a priority different than 0 in the interface.
B. Modify the router ID to be the interface IP on the serial.
C. Modify the IP address or mask of the interface to a valid one.
D. Set the network type in S1/0 to point-to-point.

Correct Answer: C

 

QUESTION 11

What is the purpose of a BGP confederation?

A. It limits the number of routes a device receives from its peers, which reduces CPU load.
B. It improves service by increasing the number of simultaneous iBGP peering sessions.
C. It redirects traffic away from route reflectors, which reduces their operating load.
D. It reduces the number of iBGP peers and increases stability.

Correct Answer: D

 

QUESTION 12

In a PIM-SM environment, which mechanism determines the traffic that a receiver receives?

A. The receiver explicitly requests its desired traffic from the RP on the shared tree.
B. The receiver explicitly requests traffic from a single source, which responds by forwarding all traffic.
C. The RP on the shared tree floods traffic out of all PIM configured interfaces.
D. The receiver explicitly requests traffic from each desired source, which responds by sending all traffic.

Correct Answer: D

 

QUESTION 13

Refer to the exhibit.

cisco 300-510 exam questions q13

An engineer has configured all routers in the environment to run IS-IS Level 1 and Level 2 routing. The engineer wants
traffic from R1 to R5 to pass via R2. but IS-IS routing has calculated the best path via R4. Which action corrects the
problem?

A. Configure routers R1, R4, and R5 for Level 2 routing only.
B. Set the link metric for the link from router R1 to router R4 to 30 or more.
C. Set the link metric on R2 for the links from router R2 to routers R3 and R4 to 30 or more.
D. Configure routers R1, R2, and R5 for Level 1 routing only.

Correct Answer: B

 

QUESTION 14

An engineer is working to implement segment routing protocol on the customer\\’s core network. Which step should the
engineer take before the segment routing is enabled and is running with BGP?

A. Segment routing must be configured with ISIS.
B. Segment routing must be configured with EIGRP.
C. Explicit-null must be configured for all neighbors.
D. MPLS must be configured.

Correct Answer: D

 

QUESTION 15

In which four ways does DHCPv6 differ from DHCPv4? (Choose four.)

A. DHCPv6 uses the same message types as DHCPv4.
B. DHCPv4 functions without external protocols.
C. A host discovers a DHCPv6 server by using a DHCP Discover packet.
D. A hosts discovers a DHCPv6 server by using a DHCP Solicit packet.
E. A DHCPv6 server replies with a DHCP Offer packet.
F. A DHCP server replies with a DHCP Advertise message.
G. An IPv6 host can request multiple addresses at the same time from a DHCPv6 server.
H. An IPv6 host can request only one IP address at a time from a DHCPv6 server.

Correct Answer: BDFG

Continue to follow to get more free updates…

New 2021 CCNP 300-510 exam questions from leads4pass 300-510 SPRI dumps! Welcome to download the newest leads4pass 300-510 VCE and PDF dumps: https://www.leads4pass.com/300-510.html (135 Q&As)

P.S. Free 2021 CCNP 300-510 SPRI dumps are available on Google Drive shared by leads4pass: https://drive.google.com/file/d/1w-diIxpD21-AoDKbyDGo1zvzzDqLYbc-/view?usp=sharing